MIPS RAM Freezer 4 Will Work on Tri-Channel Memory Kits
With some modifications. Here is a picture of the RAM Freezer 4 on top of a Gigabyte EX58-EXTREME motherboard with all of the DIMM slots populated.
As you can see, if you are running 3 modules in tri-channel, the RAM Freezer 4 is just wide enough to be able to get RAM spreaders on both sides, but you will need to remove the material in the middle of the RAM Freezer 4 in order to get a RAM spreader on the middle module. Overall with a Dremel the mod should not be very complicated and should not affect the structural integrity of the RAM Freezer.
HMm :D
ReplyDelete